The U100-G2K ULTIMA® Gimbal Optical Mount has a radically simple way of tilting an optic without translating its surface. Conventional gimbal mounts tend to be large and complex to allow high precision true gimbal motion at the optic surface. As a result, they are usually expensive. The ULTIMA-G has a simple patented design, allowing cost-effective, true gimbal mounts without the usual complexity. Like all ULTIMA mounts, thick front and rear plates and optimized, stiff springs improve the long-term stability and provide greater protection against vibrations. This 1 inch (25.4mm) mount is provided with two high precision, 100 TPI, hex adjustment screws with knob providing a ±5° range. The actuators can be quickly changed to accommodate a broad selection of adjustment screws, micrometers, and motorized actuators. What makes the ULTIMA-G unique? The optic surface is mounted at the center of a sphere. Rotation of the sphere results in pure tilt at the center, without the translation found in all kinematic optical mounts. That means your beam will go exactly where you expect, without having to make iterative adjustments of the axes. The optic mounts from the rear so that the optical surface is at the plane of rotation, regardless of the optic thickness. Slotted mounting holes on two sides are compatible with either 8-32 or M4 screws for convenient mounting.


山的U100-G2K天涯®常平架光学有彻底的简单方法视神经没有翻译其表面倾斜。传统的万向节支架往往是大型和复杂的，以允许高精度的真正万向节运动在光学表面。因此，它们通常是昂贵的。ULTIMA-G有一个简单的专利设计，允许成本效益，真正的万向节安装没有通常的复杂性。与所有ULTIMA支架一样，前厚板和后厚板经过优化，刚性弹簧提高了长期稳定性，并提供了更好的防震保护。这1英寸(25.4毫米)提供两个精度高,山100 TPI,六角螺丝调整旋钮提供±5°范围。执行机构可以迅速改变，以适应广泛的选择调整螺丝，千分尺，和电动执行机构。什么使ULTIMA-G独一无二?光学表面安装在球体的中心。球体的旋转导致中心的纯倾斜，而不需要所有运动光学支架中的平移。这意味着您的光束将精确地到达您所期望的位置，而不必对轴进行迭代调整。无论光学厚度如何，光学表面都在旋转平面上。两侧开槽安装孔与8-32或M4螺丝兼容，便于安装。