The HVM-1t is a vertical drive optic mount specifically made for thin 1-in. optics. The mount uses a threaded retaining ring to secure optics having a thickness of 6.2 mm or less. Also included with the mount is a 0.5-mm thick Delrin washer to protect the optic from damage during tightening of the retaining ring. The HVM-1t also features a rear-loading design to ensure the front face of the optic is always in the same location regardless of its thickness. The mount has standard features like a 1-in. optical axis height, 80-TPI hex key locking actuators, and an exceptionally thin 16-mm profile. The HVM-1t is designed with several mounting options including a center clearance hole for #8 or M4 screws, two #8 threaded mounting holes and two M4 threaded mounting holes. For industrial applications, there are also two 1/8-in. keying pin holes.
镜片直径
25.4 mm
Allen-Key, locking
θx, θy
2.5 arc sec
特征
Thin Optic Mount
角度范围
±2.5 °
调节螺纹
80 TPI
材料
Anodized Aluminum
机制
Kinematic
镜片厚度
6.2 mm
螺纹类型
8-32 & M4
光轴高度
25.4 mm
hm -1t是一个垂直驱动光学安装专门为薄1英寸。光学。这种支架使用螺纹固定环来固定厚度为6.2毫米或以下的光学元件。安装还包括一个0.5毫米厚的Delrin垫圈,以保护光学在紧固环期间免受损坏。HVM-1t还具有后加载设计,以确保无论厚度如何,光学元件的正面始终在同一位置。安装有标准的功能,如1英寸。光轴高度,80-TPI六角键锁定执行机构,和一个特别薄的16毫米的配置文件。该hm -1t具有多个安装选项,包括8号或M4螺丝的中心间隙孔、两个8号螺纹安装孔和两个M4螺纹安装孔。对于工业应用,也有两个1/8英寸。键控销孔。