The U100-A2K-170N ULTIMA, 1.0 in. diameter mirror mount is assembled with the new 170-TPI adjustment screws, which provide excellent sensitivity and stability. Compared to the standard 100-TPI mirror mount, the U100-A2K-170N provides 43% better sensitivity: 2.2 vs. 3.8 arc sec. The benefit of the 170-TPI adjuster was boosted by the results of timed alignment testing where the U100-A2K-170N could be consistently aligned to a band of less than +/- 3 µrad in about half the time as the same mount with 100-TPI threads. The U100-A2K-170N retains all of the outstanding features of the ULTIMA family including a patented clear quadrant design, actuators that can be quickly changed to accommodate a broad selection of other adjustment screws, micrometers, and motorized actuators, and hard carbide pads to enable smooth, repeatable ±7° of tip/tilt adjustment. A large array of optical mounting accessories is available for these mounts making ULTIMA a basic building block for many optical systems. Convenient clearance mounting holes on each of two sides are compatible with either 8-32 or M4 screws providing quicker, more precise, and more secure mounting. ULTIMA mounts can be mounted to posts for adjustable height or pedestal posts for a stable fixed height.


U100-A2K-170N ULTIMA, 1.0英寸。内径镜座采用全新170-TPI调整螺丝装配，灵敏度高，稳定性好。标准100 - tpi镜山相比,u100 - a2k - 170 n提供43%更好的灵敏度:2.2和3.8弧秒。170 - tpi调节器的利益受到时间一致性测试的结果在u100 a2k - 170 n可以持续一致的一群小于+ / - 3µrad在大约一半的时间是相同的山100 - tpi线程。u100 - a2k - 170 n保留所有的天涯家族的杰出的特征包括专利清晰的扇形设计,驱动器,可以迅速改变,以适应广泛的选择的其他调整螺丝,微米,电动执行器,碳化和硬垫使光滑、可重复的±7°提示/倾斜调整。大量的光学安装配件可用于这些安装，使ULTIMA成为许多光学系统的基本组成部分。方便的间隙安装孔在双方都是兼容的8-32或M4螺丝提供更快，更精确，更安全的安装。ULTIMA支架可以安装在高度可调的柱子上，也可以安装在高度稳定的基座上。