The U100-ACG-2K-NL ULTIMA® Corner Gimbal Optical Mount can tilt an optic without translating its surface by adjusting two adjacent actuators. Placing the center of the optic in the corner, at the intersection of the actuator axes, and adjusting two adjacent actuators an equal amount, results in gimbal-like motion. Adjust one actuator at a time and the mount acts as a standard kinematic optical mount. The optic mounts from the rear so that the optical surface is at the plane of rotation, regardless of the optic thickness. Corner mounting allows an optic to be positioned in tight locations where using a standard mount simply wouldn’t fit. For example, this mount allows you to place the edge of two optics in very close proximity to each other. Like all ULTIMA mounts, thick front and rear plates and optimized stiff springs improve long-term stability and provide greater protection against vibrations. This mount for 1 inch (25.4 mm) diameter optics is equipped with two high precision, 100 TPI locking adjustment screws with knob. The actuators can be quickly changed to accommodate a broad selection of adjustment screws, micrometers, and motorized actuators. A convenient clearance mounting hole on each of two sides is compatible with either 8-32 or M4 screws providing quicker, more precise and more secure mounting.

山的U100-ACG-2K-NL天涯®角落常平架光学可以倾斜一个光学不翻译它的表面通过调整两个相邻驱动器。将光学中心置于转角处，在执行机构轴的交点处，并相等数量地调整两个相邻的执行机构，就会产生类似万向节的运动。每次调整一个执行机构，安装作为一个标准的运动学光学安装。无论光学厚度如何，光学表面都在旋转平面上。角安装允许光学定位在紧凑的位置，使用标准安装根本不适合。例如，这个安装允许您将两个光学元件的边缘非常接近地放置在一起。与所有ULTIMA支架一样，前、后厚板和经过优化的刚性弹簧提高了长期稳定性，并提供了更好的防震保护。这种安装为1英寸(25.4毫米)直径的光学配备两个高精度，100 TPI锁定调整螺丝与旋钮。执行机构可以迅速改变，以适应广泛选择的调整螺丝，千分尺，和电动执行机构。两侧各有一个方便的间隙安装孔，与8-32或M4螺丝兼容，提供更快、更精确、更安全的安装。