The XPS-DRVP1 is an XPS compatible driver card that can drive piezo-stack based NanoPositioning products, with model numbers that end with a '–D'. These NanoPositioners are differentiated with a 25 pin D-sub connector. Like most standard Newport stages, the connector has embedded ESP technology that facilitates setup by enabling XPS controller to recognize the attached stage. This provides the ability to control and drive the traditional micro-positioning stages and NanoPositioning stages with the one controller, the XPS. The XPS is a more flexible alternative to the NPC3 or NPC3SG controllers. 
The XPS-DRVP1 can drive both open loop and closed loop NanoPositioning stages equipped with strain gage position sensor, with similar dynamic performance compared to the NPC3 controller.

• ESP 兼容性

  ESP Stage Detection

• 电机控制

  60mA peak, -10V to 130V

XPS- drvp1是一个XPS兼容的驱动卡，可以驱动基于压电堆叠的纳米级定位产品，其型号以' -D '结尾。这些纳米定位点是由一个25针d -接头区分的。与大多数标准的Newport阶段一样，连接器具有嵌入式ESP技术，通过使XPS控制器能够识别附加的阶段来简化设置。这提供了控制和驱动传统的微定位阶段和纳米定位阶段的能力与一个控制器，XPS。XPS是NPC3或NPC3SG控制器的更灵活的选择。XPS-DRVP1可以驱动带有应变片位置传感器的开环和闭环纳米定位级，与NPC3控制器相比具有相似的动态性能。