The DM11-25 Differential Micrometer delivers ultra-fine, sub-micron positioning capabilities and coarse travel up to 25 mm in a single instrument. In most cases, DM Series Differential Micrometers can directly replace BM Series Micrometers and BHC Locking Drives to provide approximately ten times better positioning sensitivity. DM Series Micrometers are the standard choice of actuator on UMR and MVN Series Stages and on SL Series Mirror/Beamsplitter Mounts. In essence, the DM Differential Micrometer is a standard micrometer with a 0.05 mm high-resolution micrometer built around it. Coarse positioning, provided by the control knob at the end of the micrometer, enables rapid translation with a sensitivity of 1 μm. Then, by using the fine adjustment knob closest to the positioner, the position can be further optimized with a sensitivity of 0.1 μm over a limited travel range. The fine adjustment knob is graduated to permit direct reading of position in 2 μm increments. 6.6 lb. Load Capacity.


DM11-25差动千分尺提供超细，亚微米定位能力和粗行程高达25毫米在一个单一的仪器。在大多数情况下，DM系列差动千分尺可以直接取代BM系列千分尺和BHC锁紧驱动器，提供大约10倍的定位灵敏度。DM系列测微仪是UMR、MVN系列级和SL系列镜/波束分离器支架上执行机构的标准选择。本质上，DM差动千分尺是一种标准千分尺，其周围装有0.05 mm高分辨率千分尺。粗定位,提供的控制旋钮的测微计,使快速翻译1μm敏感性的。然后,通过微调旋钮定位器,最近的位置可以进一步优化的灵敏度0.1μm旅行范围有限。微调旋钮是允许毕业直读的位置在2μm增量。6.6磅负载能力。