The AJS8-100-02H Miniature Adjustment Screw has precision rolled threads for exceptionally smooth adjustment and higher sensitivity than standard micrometers. The AJS8-100-02H offers 0.25 inch (6.35 mm) precision travel obtained with hex-head adjustment, ideal for use with Newport optical mounts, stages, and most micrometer-compatible components. With sub-micron sensitivity, they are a cost-effective alternative to micrometers where position readout is not required. Engaging or disengaging our patented thread-pitch lock won't influence the screw position. High-precision 100 TPI, rolled stainless steel threads are mated with the collet and proprietary lubricant for stictionless movement. The standard 0.249 in. (6.3 mm) diameter collet is threaded with a nut for mounting to optical mounts and stages. Our patented thread-pitch lock secures the adjustment screw from turning by simply tightening a setscrew. The lock screw conveniently located on the end next to the drive screw. A single wrench is used for both adjustment and locking. KD.37 and KD.75 stainless steel knobs are available as an accessory.

AJS8-100-02H微型调节螺丝具有精密轧制螺纹，调节异常平滑，灵敏度高于标准千分尺。AJS8-100-02H提供0.25英寸(6.35 mm)的六角头调整精度行程，非常适合与新港光学支架、级和大多数微米兼容组件一起使用。亚微米的灵敏度，他们是一个成本效益的选择，以微米的位置读出不需要。我们的专利螺纹螺距锁的啮合和拆卸不会影响螺丝的位置。高精度100tpi，轧制不锈钢螺纹，配合夹头和专用润滑油，无粘结运动。标准的0.249英寸。(6.3 mm)直径夹头与螺母螺纹连接，用于安装在光学支架和舞台上。我们的专利螺纹螺距锁定，确保调整螺丝，从旋转只要拧紧固定螺丝。锁紧螺钉方便地安装在紧靠驱动螺钉的一端。调整和锁定都使用一个扳手。可选配KD.37、KD.75不锈钢旋钮。