The AJS100-1H Adjustment Screw has precision rolled threads for exceptionally smooth adjustment and higher sensitivity than standard micrometers. The AJS100-1H offers 1 inch (25.4 mm) precision travel obtained with hex-head adjustment, ideal for use with Newport optical mounts, stages, and most micrometer-compatible components. With sub-micron sensitivity, they are a cost-effective alternative to micrometers where position readout is not required. Engaging or disengaging our patented thread-pitch lock won't influence the screw position. High-precision 100 TPI, rolled stainless steel threads are mated with the collet and proprietary lubricant for stictionless movement. The standard 0.375 in. (9.5 mm) diameter collet is threaded with a nut for mounting to optical mounts and stages. Our patented thread-pitch lock secures the adjustment screw from turning by simply tightening a setscrew. The lock screw conveniently located on the end next to the drive screw. A single wrench is used for both adjustment and locking. KD.37 and KD.75 stainless steel knobs are available as an accessory.

AJS100-1H调节螺丝具有精密轧制螺纹，调节异常平滑，灵敏度高于标准千分尺。AJS100-1H提供了1英寸(25.4毫米)的精密行程，通过六角头调整，非常适合与新港光学支架，舞台，和大多数微米兼容的组件一起使用。亚微米的灵敏度，他们是一个成本效益的选择，以微米的位置读出不需要。我们的专利螺纹螺距锁的啮合和拆卸不会影响螺丝的位置。高精度100tpi，轧制不锈钢螺纹，配合夹头和专用润滑油，无粘结运动。标准的0.375英寸。(9.5毫米)直径夹头螺纹与螺母，用于安装到光学安装和阶段。我们的专利螺纹螺距锁定，确保调整螺丝，从旋转只要拧紧固定螺丝。锁紧螺钉方便地安装在紧靠驱动螺钉的一端。调整和锁定都使用一个扳手。可选配KD.37、KD.75不锈钢旋钮。