The FPR1-C1A Fiber Optic Positioners provides four degrees of precision positioning for connectorized standard or polarization-preserving fibers. We’ve improved these mounts by adding high-resolution 100 TPI adjustment screws and including new larger diameter knobs with an integral hex hole for smooth adjustment with increased sensitivity. Fibers are aligned in four axes (XYZθZ). Axial Z motion is accomplished without rotation of the fiber by a knurled knob with a precision 80 TPI thread. The FPR1-C1A incorporates our new zero-free play XY mechanism ensuring accurate positioning and enhanced long-term stability, reducing drift over both time and temperature. New independent locks for each axis of translation and rotation securely lock the mechanism, not just the actuator screws, maintaining stable alignment. Engaging or disengaging each lock on these models has negligible influence on the other axes. For the FPR1-C1A connectorized fiber positioners, FPH-CA Series Fiber Chucks must be ordered separately. Rotating chucks are graduated in 15° increments and may be rotated through a full 360°. All FP Series Fiber Optic Positioners have threaded holes in their base for post mounting.

FPR1-C1A光纤定位器为连接标准或保偏光纤提供4度的精确定位。我们通过增加高分辨率100 TPI调整螺丝和新的更大直径旋钮与一个完整的六角孔，以提高灵敏度平滑调整这些安装。纤维在四轴(XYZθZ)是一致的。轴向Z运动是由一个精确的80 TPI螺纹滚压旋钮实现的，不需要旋转光纤。FPR1-C1A采用了我们新的无零play XY机构，确保了精确定位和增强了长期稳定性，减少了随时间和温度的漂移。新的独立锁为各轴的平移和旋转安全锁紧机构，而不仅仅是执行机构的螺丝，保持稳定的对准。这些模型上的每个锁的连接或断开对其他轴的影响可以忽略不计。对于FPR1-C1A连接型纤维定位器，必须单独订购FPH-CA系列纤维卡盘。旋转轻叩毕业于15°增量,可以通过一个完整的旋转360°。所有FP系列光纤定位器的底座都有螺纹孔用于后安装。