The SR50PP Compact Rotation stage is designed to rotate optical components up to 1 inch diameter, such as polarizers, wave plates, or wedges. The small size allows use in confined spaces, such as laser cavities, disk texturing machines, or manufacturing areas for fiber optical components. The lightweight, low profile design incorporates an aluminum body with pre-loaded ball bearings. This proprietary ball bearing design provides smooth rotation with minimal wobble. A precision ground worm gear produces consistent driving torque to the rotating carriage and eliminates variations in motor current. The motor is folded inside the stage body to give an extremely small footprint for a stage at this level of precision. The SR50PP stage features an angular resolution of 0.001° achieved with a open loop stepper motor. The stages are equipped with a hardware origin allowing the stage to return to a reference home position to within 0.01°. SR50 stages can run in continuous rotation mode.
孔径
25.7 mm
最大速度
4°/s
最大扭矩
0.5 Nm
角范围
360°
中心负载
30 N
最小位移增量
4.0 mdeg
Accuracy, Typical
±20 mdeg
Accuracy, Guaranteed
±30 mdeg
单向重复精度,典型值
±3.5 mdeg
单向重复精度,保证值
±5.0 mdeg
双向重复精度,典型值
±16 mdeg
双向重复精度,保证值
±25 mdeg
摆动(典型值)
±20 µrad
摆动,保证值
±50 µrad
惯性
0.015 kg.m2
Transversal Compliance
160 µrad/Nm
原点
Optical, centered
原点重复精度
±25 mdeg
Encoder Resolution
0.001°
电缆长度
3 m
接头类型
DB25 Male
螺纹类型
M3
重量
0.3 kg
MTBF
10,000 h (25% load, 30% Duty cycle)
RoHS
Compliant
SR50PP紧凑型旋转台用于旋转直径不超过1英寸的光学元件,如偏振片、波板或楔片。体积小,适用于密闭空间,如激光腔、圆盘变形机或光纤元件制造区域。轻量,低轮廓的设计,结合了一个铝体与预先加载的滚珠轴承。这种专有的滚珠轴承设计提供平稳的旋转和最小的摆动。精密地蜗轮对旋转的托架产生一致的驱动扭矩,消除了电机电流的变化。电机被折叠在舞台主体内部,在这种精度水平上给舞台一个非常小的足迹。SR50PP阶段特性的角分辨率0.001°实现开环步进电机。阶段配备硬件允许起源阶段回到原位置的引用在0.01°。SR50级可在连续旋转模式下运行。