The RV350CCHAHLT High Torque Rotation Stage provides high-precision angular positioning accuracy combined with high load capacity. This 350 mm diameter stage features DC drive equipped with a reduction gear providing higher torque and payload inertia capacity. It features a high-resolution direct reading encoder and tachometer for superior repeatability, position stability and speed regulation. All RV stages are constructed of tool steel, with rotation accuracy ensured by ground bearing surfaces. A double row of preloaded bearings allows for high off-center loads in a reduced footprint. The single monolithic design offers improved stiffness without compromising dynamic performance. Precise rotation is ensured by a precision ground and hardened worm gear.
角范围
±170°
最大速度
16°/s
最大扭矩
30 N·m
中心负载
6500 N
螺纹类型
M6
最小位移增量
0.20 mdeg
单向重复精度,典型值
±0.07 mdeg
单向重复精度,保证值
±0.10 mdeg
双向重复精度,典型值
±0.4 mdeg
双向重复精度,保证值
±0.6 mdeg
Accuracy, Typical
±2.0 mdeg
Accuracy, Guaranteed
±2.5 mdeg
摆动(典型值)
±4.0 µrad
摆动,保证值
±8.0 µrad
Eccentricity, Typical
±1.4 µm
偏心率,保证值
±2.0 µm
惯性
10 kg.m2
Transversal Compliance
0.1 µrad/N·m
原点
Optical, centered
原点重复精度
±0.1 mdeg
Encoder Resolution
0.035 mdeg
电缆长度
3 m
直径
350 mm
孔径
280 mm
接头类型
DB25 Male
重量
33 kg
MTBF
20,000 h (25% load, 10% duty cycle)
RoHS
Compliant
RV350CCHAHLT高转矩旋转台具有高精度的角定位精度和高负载能力。这个直径为350毫米的级具有直流驱动器配备了一个减速齿轮提供更高的扭矩和负载惯性能力。它具有高分辨率的直读编码器和转速计,具有优越的重复性,位置稳定性和速度调节。RV各级均为工具钢结构,旋转精度由地面轴承面保证。双排预加载轴承允许高偏心负荷在减少足迹。单一的整体设计提供改进的刚度,而不影响动态性能。精密的磨削和淬火蜗轮保证了精确的旋转。