The UZS80PP Vertical Stage offers 4.5 mm vertical adjustment of loads up to 30 N and mounts on top of our UTS series linear stages. The UZS80PP stepper motor version is a more economical version for less demanding applications. When used with motion controllers with high micro-step capability, like the XPS, ESP301 or SMC100PP, low noise operation and very small incremental motions are guaranteed. The UZS80PP does not use encoder feedback, but reaches a position by the number of commanded steps and micro-steps. For this purpose, the stepper motor is directly attached to the worm screw.

• 行程范围

  4.5 mm

• 最小位移增量

  0.20 µm

• 最大速度

  2 mm/s

• 中心负载

  30 N

• Accuracy, Typical

  ±0.35 µm

• Accuracy, Guaranteed

  ±2.0 µm

• 双向重复精度，典型值

  ±0.5 µm

• 双向重复精度，保证值

  ±2.2 µm

• 单向重复精度，典型值

  ±0.25 µm

• 单向重复精度，保证值

  ±0.7 µm

• 驱动螺距

  0.8 mm

• 限位开关

  Optical

• 原点

  Optical, centered

• 原点重复精度

  ±2 µm

• 电缆长度

  3 m  

• 接头

  DB15 Male

• 俯仰，典型值

  ±37 µrad

• Pitch, Guaranteed

  ±75 µrad

• 俯仰顺应性

  100 µrad/Nm

• Roll, Typical

  ±50 µrad

• Roll, Guaranteed

  ±100 µrad

• 翻转顺应性

  80 µrad/Nm  

• 螺纹类型

  M4

• 重量

  2.8 kg  

• MTBF

  20,000 h (25% load, 10% duty cycle)

• RoHS

  Compliant

该UZS80PP垂直阶段提供4.5毫米的垂直调整负载高达30牛和安装在我们的UTS系列线性阶段的顶部。UZS80PP步进电机版本是一个更经济的版本，要求较少的应用。当与XPS、ESP301或SMC100PP等具有高微步功能的运动控制器一起使用时，可以保证低噪声操作和非常小的增量运动。UZS80PP不使用编码器反馈，但通过命令步数和微步数达到一个位置。为此，步进电机直接连接蜗杆螺杆。