The M-ILS200LM Linear Motor Stage feature a robust design with 200 mm of high performance travel and low cost design, making it a cost-effective solutions for precision industrial applications such as semiconductor wafer inspection, micro-electronics test and assembly, pick and place, DNA sequencing, or laser machining. It utilizes an FEM-optimized extruded aluminum body that is extremely stiff and minimizes the bending effect caused by the different thermal expansion coefficients of the aluminum body and the steel rails. The rigidity of the body minimizes the deflection under load. The ILS-LM employs a centered, high efficiency 3-phase, synchronous ironless, linear motor that is absolutely noise-free and has the advantage of higher speed, high acceleration and high system responsiveness without wear associated with motor brushes or drive screws. Recirculating ball bearing slides provide excellent payload capabilities and long life. The movement is smooth with low noise. Precision position feedback is supplied by a very repeatable linear scale mounted in the stage. The encoder signals are interpolated by Newport’s XPS motion controller with nanometer resolution for outstanding position sensitivity, repeatability, and stability.
最大速度
500 mm/s
最小位移增量
0.010 µm
Continuous Motor Force
20 N
Peak Motor Force
72 N
中心负载
250 N
Accuracy, Typical
±1.0 µm
Accuracy, Guaranteed
±2.0 µm
双向重复精度,典型值
±0.12 µm
双向重复精度,保证值
±0.30 µm
俯仰,典型值
±40 µrad
Pitch, Guaranteed
±135 µrad
俯仰顺应性
10 µrad/Nm
偏转,典型值
±25 µrad
Yaw, Guaranteed
±125 µrad
偏摆顺应性
10 µrad/Nm
翻转顺应性
15 µrad/Nm
Encoder Resolution
1 Vpp 20 µm pitch
原点
Optical, centered
原点重复精度
±0.1 µm
电缆长度
5 m
接头类型
DB15 Male and DB15 Female
螺纹类型
M6
重量
3.7 kg
MTBF
20,000 h (25% load, 30% duty cycle)
RoHS
Compliant
M-ILS200LM直线电机级具有200毫米的高性能旅行和低成本设计的健壮设计,使其成为精密工业应用(如半导体晶圆检测、微电子测试和组装、拣选和放置、DNA测序或激光加工)的低成本解决方案。它利用了一个飞秒优化的挤压铝车身,它是极其僵硬的,并最小化了由铝车身和钢轨的不同热膨胀系数引起的弯曲效应。阀体的刚性使负载下的挠度降至最低。ls - lm采用的是一种集中、高效的三相同步无铁直线电机,绝对无噪声,具有转速高、加速度大、系统响应快等优点,与电机刷或驱动螺丝无磨损。滚珠轴承滑块具有良好的载荷能力和较长的使用寿命。运动平稳,噪音低。精密位置反馈是由安装在舞台上的一个非常可重复的线性刻度提供的。编码器的信号插值由新港的XPS运动控制器与纳米分辨率为突出的位置灵敏度,重复性和稳定性。