The 9065-XY-M Pint-Sized Triple Divide XY Axis Translation Stage is ideal for applications where you are short on space but don't want to compromise on performance. At just 38.1 mm by 38.1 by 19.05 mm, these little ball-bearing stages packs the same performance as our full-sized Triple-Divide stage line. Fully compatible with our larger Triple-Divide stage line and accessories, you get 0.55 inch XY travel with 0.5 μm resolution and better than <3 μm straight-line accuracy. M4 and M6 threaded mounting holes. NOTE: Actuators are not included with these stages. We recommend using our 9301 Adjustment Screws or our SM-13 micrometers. For even more precise control, try our 8301NF Picomotor™ actuator.

• 位移轴

  X, Y

• 最大位移台行程

  14 mm  

• 螺纹类型

  M4 and M6

• 推荐的促动器

  SM-13 mic, 9301 screw, 8301 pico

• 负载

  53 N  

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 分辨率

  <0.5 µm

• 直线精度

  <3 µm

• 
  

9065-XY-M小型三除XY轴转换阶段非常适合空间有限但又不想在性能上妥协的应用程序。只有38.1 mm×38.1×19.05 mm，这些小型滚珠轴承级与我们的全尺寸三等分级线具有相同的性能。完全兼容我们的大线及配件Triple-Divide阶段,得到0.55英寸XY旅行0.5μm分辨率和比< 3μm直线精度。M4和M6螺纹安装孔。注意:执行机构不包括在这些阶段。我们建议使用我们的9301调整螺丝或SM-13微米。更精确的控制,尽8301 nf Picomotor™驱动器。