The 9065-X-M Pint-Sized Triple Divide X Axis Translation Stage is ideal for applications where you are short on space but don't want to compromise on performance. Just 38.1 by 38.1 by 19.05 mm, this little ball-bearing stage packs the same performance as our full-sized Triple-Divide stage line. You get effortless modularity so you can configure and reconfigure from 1 to 2 to 3 axes coupled with stability that rivals integrated XYZ stages (which don't give you any flexibility). Fully compatible with our larger Triple-Divide stage line and accessories, you get 0.55 inch X travel with 0.5 μm resolution and better than <3 μm straight-line accuracy. M4 and M6 threaded mounting holes. NOTE: Actuators are not included with these stages. We recommend using our 9301 Adjustment Screws or our SM-13 micrometers. For even more precise control, try our 8301NF Picomotor™ actuator.

• 位移轴

  X

• 最大位移台行程

  14 mm  

• 螺纹类型

  M4 and M6

• 推荐的促动器

  SM-13 mic, 9301 screw, 8301 pico

• 负载

  53 N  

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 分辨率

  <0.5 µm

• 直线精度

  <3 µm

• 
  

9065-X-M小尺寸三除X轴翻译阶段是理想的应用程序，你是空间不足，但不想妥协的性能。只有38.1×38.1×19.05毫米，这个小滚珠轴承阶段包相同的性能，我们的全尺寸三分阶段线。您可以轻松地获得模块化，因此您可以从1到2到3轴进行配置和重新配置，同时还可以获得与集成XYZ阶段(不给您任何灵活性)竞争的稳定性。完全兼容我们的大线及配件Triple-Divide阶段,得到0.55英寸X 0.5μm分辨率和旅行比< 3μm直线精度。M4和M6螺纹安装孔。注意:执行机构不包括在这些阶段。我们建议使用我们的9301调整螺丝或SM-13微米。更精确的控制,尽8301 nf Picomotor™驱动器。