The 9065-Z-M Pint-Sized Triple Divide X Axis Translation Stage is ideal for applications where you are short on space but don't want to compromise on performance. Just 38.1 mm by 38.1 mm by 19.05 mm, this little ball-bearing stage packs the same performance as our full-sized Triple-Divide stage line. You get effortless modularity so you can configure and reconfigure from 1 to 2 to 3 axes coupled with stability that rivals integrated XYZ stages (which don't give you any flexibility). Fully compatible with our larger Triple-Divide stage line and accessories, you get 0.55 inch Z travel with 0.5 μm resolution and better than <3 μm straight-line accuracy. M4 and M6 threaded mounting holes. NOTE: Actuators are not included with these stages. We recommend using our 9301 Adjustment Screws or our SM-13 micrometers. For even more precise control, try our 8301NF Picomotor™ actuator.

• 位移轴

  Z

• 最大位移台行程

  14 mm  

• 螺纹类型

  M4 and M6

• 推荐的促动器

  SM-13 mic, 9301 screw, 8301 pico

• 负载

  53 N  

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 分辨率

  <0.5 µm

• 直线精度

  <3 µm

9065-Z-M小型三除X轴平移阶段非常适合空间有限但又不想在性能上妥协的应用程序。只有38.1毫米×38.1毫米×19.05毫米，这个小滚珠轴承舞台包装的性能与我们的全尺寸三等分舞台线相同。您可以轻松地获得模块化，因此您可以从1到2到3轴进行配置和重新配置，同时还可以获得与集成XYZ阶段(不给您任何灵活性)竞争的稳定性。完全兼容我们的大Triple-Divide阶段线及配件,你得到0.55英寸Z旅行0.5μm分辨率和比< 3μm直线精度。M4和M6螺纹安装孔。注意:执行机构不包括在这些阶段。我们建议使用我们的9301调整螺丝或SM-13微米。更精确的控制,尽8301 nf Picomotor™驱动器。