The 9062-XZ-M Gothic-Arch XY Translation Stage uses stainless-steel construction and thumbscrew locks to offer the ultimate in stability and rigidity. Gothic-arch bearings offer the smooth motion of ball bearings but high stiffness and repeatability for the 40 mm x 40 mm platform with M4 and M6 mounting holes. The unique gothic profile provides four points of contact (rather than two) so that the load and momentum are more evenly distributed. Side-mounted micrometer clamps minimize the overall footprint. These stages are compatible with our goniometers and rotation stages.

NOTE: Actuators are not included with these stages. We recommend using our screw sets or our Model 9355 micrometers. For even more precise control, try our Picomotor™ actuator.

• 位移轴

  X, Z

• 最大位移台行程

  12.7 mm  

• 螺纹类型

  M2, M4 and M6

• 推荐的促动器

  9355 mic, 9301 screw, 8301NF Pico

• 负载

  84 N  

• 材料

  Stainless Steel

• 轴承

  Gothic-Arch Bearings

• 垂直载重能力

  26 N  

• 平台尺寸

  40 x 40 mm

• 滚动

  10 arc sec

• 偏转

  20 arc sec

• 
  

9062-XZ-M哥特式拱XY平移舞台采用不锈钢结构和拇指螺丝锁，提供了稳定和刚性的极限。哥特式拱轴承提供了滚珠轴承的平稳运动，但高刚度和重复性为40毫米x40毫米平台与M4和M6安装孔。独特的哥特式轮廓提供了四个接触点(而不是两个)，以便负载和动量更均匀地分布。侧面安装的测微夹可以最大限度地减少总占地面积。这些阶段与我们的测角仪和旋转阶段兼容。

注意:执行机构不包括在这些阶段。我们建议使用我们的螺丝组或我们的型号9355微米。更精确的控制,尽Picomotor™驱动器。