The 8703 Single-axis Picomotor™ Driver Module is for those of you who've asked us for a Picomotor™ driver that interfaces through TTL or analog signals. This redesigned driver module is based upon our Model 8712 OEM driver module, but now comes on its own interface board and with connectors so you can easily interface with it and build it into your device, instrument, or laboratory setup. The Model 8703 driver module requires an external power supply, and is not compatible with the iPico driver and its accessories.

• 类型

  Motion Controller

• 轴数

  1

• 驱动方式

  Open Loop Picomotor

• 接口

  Input: 9-Pin Phoenix MSTBA
  Output: RJ-11 Phoenix 3-Position Terminal Block

• 电源要求

  10 to 12 VDC

• 功耗

  7.5 W @ 1 kHz Sustained Speed

• 最大脉冲频率

  2 kHz  

• 工作温度

  0 to 65°C

• 储存温度

  -40 to 95°C

• 重量

  0.163 kg  

• 
  

8703单轴Picomotor™驱动器模块是对于那些已经要求我们Picomotor™通过TTL或模拟信号驱动程序接口。这个重新设计的驱动模块是基于我们的8712 OEM驱动模块，但是现在有了自己的接口板和连接器，所以您可以轻松地与它进行接口，并将其构建到您的设备、仪器或实验室设置中。8703型驱动模块需要外部电源，与iPico驱动及其附件不兼容。