The model 8742 is a 4-axis open-loop intelligent motion controller/driver that provides a compact and low cost solution for driving New Focus open-loop Picomotors products. It is a single-box solution that can be computer controlled via USB and Ethernet communication interfaces using Newport Motion Control Language (NMCL) command set. Both interfaces are well supported via Windows DLL, sample LabVIEW™VIs, and intuitive graphical user interface (GUI) Windows application with device auto-discovery feature. Each model 8742 controller/driver can control one of four 4-pin RJ-22 single output ports for use with any single-channel Picomotor actuator at any given time. The model 8725 multi-axis adapter can be used to connect the 4-pin RJ-22 output ports on the drivers to New Focus™ Picomotor products with 6-pin RJ-11 connectors. Note: Power Supply not included

• 类型

  Motion Controller

• 轴数

  4

• 计算机接口

  10/100 Ethernet, USB

• 电源要求

  10.5 to 14.5 VDC

• 功耗

  11 W @ 2 kHz Sustained Speed, 2 W Idle

• 最大脉冲频率

  2 kHz  

• 工作温度

  0 to 65°C

• 储存温度

  -40 to 95°C

• 重量

  0.272 kg  

• 8742型是一种四轴开环智能运动控制器/驱动器，为驱动新型聚焦开环微电机产品提供了一种紧凑、低成本的解决方案。这是一个单独的盒子可以电脑控制解决方案,通过USB接口和以太网通信接口使用新港运动控制语言(NMCL)命令集。两个接口都支持通过Windows DLL,样本虚拟仪器™VIs,直观的图形用户界面(GUI) Windows应用程序与设备自动发现功能。每个型号8742控制器/驱动程序可以控制四个4针RJ-22单个输出端口中的一个，在任何给定的时间与任何单通道皮电机驱动器一起使用。8725型多轴适配器可用于连接4-pin RJ-22输出端口上的司机新的焦点™Picomotor产品6-pin RJ-11连接器。注:不含电源