The 9064-XY-M Triple Divide XY Axis Translation Stage puts two single-axis 28 mm travel stages together using our e⋅z⋅Trac™ to give you one of the lowest-profile XY stages available. Its 1.5 inch height creates a stable platform and the e⋅z⋅Trac allows you to coarsely position in both X and Y before finely positioning the stage using the actuators. Switching between left- and right-handed versions is as easy as turning a single locking screw. M4 and M6 threaded mounting holes. NOTE: Actuators are not included with these stages. We recommend using our 9302 Adjustment Screws or our SM-25 micrometers. For even more precise control, try our 8302 Picomotor™ actuator.

• 位移轴

  X, Z

• 最大位移台行程

  28 mm  

• 螺纹类型

  M4 and M6

• 推荐的促动器

  SM-25 mic, 9302 screw, 8302 pico

• 负载

  89 N  

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 分辨率

  <0.5 µm

• 直线精度

  <2.5 µm

• 
  

• 9064 - XY - m三分XY轴翻译阶段将两个单轴28毫米旅游阶段一起用我们的e⋅z⋅Trac™给你可用lowest-profile XY阶段之一。其1.5英寸高度创造了一个稳定的平台和e⋅z⋅Trac允许你粗位置在X和Y精细定位阶段之前使用致动器。在左手和右手的版本之间切换就像转动一个锁紧螺丝一样简单。M4和M6螺纹安装孔。注意:执行机构不包括在这些阶段。我们建议使用我们的9302调整螺丝或SM-25微米。更精确的控制,尽8302 Picomotor™驱动器。