The 9064-Z-M Triple Divide Z Axis Translation Stage in combination with its included e⋅z⋅Trac system provides a low profile for stability and a small footprint. The Z-stage is the same as the X-stage, but with the micrometer clamp repositioned so that weight is held by an actuator and not the springs. You can easily convert back and forth between the X and Z configurations. Combine this stage with any of the accessories on to build the translation system you want. NOTE: Actuators are not included with these stages. We recommend using our 9302 Adjustment Screws or our SM-25 micrometers. For even more precise control, try our 8302 Picomotor™ actuator. M4 and M6 mounting threads.

• 
  

• 位移轴

  Z

• 最大位移台行程

  28 mm  

• 螺纹类型

  M4 and M6

• 推荐的促动器

  SM-25 mic, 9302 screw, 8302 pico

• 负载

  89 N  

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 分辨率

  <0.5 µm

• 直线精度

  <2.5 µm

• 
  

• 9064 - Z - m三分Z轴翻译阶段结合其包括e⋅Z⋅Trac系统提供了一个低姿态稳定和一个小的足迹。z级和x级是一样的，但是用千分尺夹具重新定位，使重量由执行机构而不是弹簧保持。您可以轻松地在X和Z配置之间来回转换。将这个阶段与上面的任何附件结合起来，构建您想要的翻译系统。注意:执行机构不包括在这些阶段。我们建议使用我们的9302调整螺丝或SM-25微米。更精确的控制,尽8302 Picomotor™驱动器。M4和M6安装线程。