The M-426A High-Performance Low-Profile Crossed-Roller Bearing Linear Stages feature crossed-roller bearings running on ground steel V-ways to provide an attractive combination of high-resolution movement, low runout, and large load capacity. For stability, repeatability, and exceptionally smooth motion, actuators bear upon a hardened carbide insert. Springs provide preload against the actuator tip to eliminate backlash. To ensure consistently dependable performance, these stages are extensively tested in Newport’s Interferometric Quality Assurance Facility. A highly stable and rigid stainless steel actuator mounting system allows your choice of Newport’s manual or motorized actuators to be attached to the stage in either a left- or right-hand configuration. A non-influencing lock (also reversible for left handed configurations) similar to those used on our top of the line ULTRAlign™ Series provides positive stable positioning and guards against inadvertent adjustments. This aperture platform version features a convenient array of Metric M6 tapped holes and a 25.4 mm travel range. The 50.8 mm diameter aperture is unobscured over 16 mm of travel. The stages are easily stacked for XY applications, and may be combined with our Model 360-90 Angle Bracket for XYZ configurations.
位移轴
X
最大位移台行程
25 mm
螺纹类型
M6
推荐的促动器
SM-25 mic, AJS100-1 screw
负载
325 N
材料
Aluminum
轴承
Crossed-Roller Bearings
驱动位置
Side drive
平台尺寸
88.9 x 88.9 mm with 50.8 mm Aperture
高度
25.4 mm
M-426A高性能的低轮廓十字滚子轴承线性级特点是十字滚子轴承运行在地面钢v形通道上,提供了高分辨率运动、低跳动和大负载能力的诱人组合。为了稳定性、可重复性和特别平滑的运动,执行机构安装在硬质合金刀片上。弹簧对执行机构尖端提供预紧力,以消除间隙。为了确保持续可靠的性能,这些阶段在新港的干涉质量保证设施中进行了广泛的测试。一个高度稳定和刚性不锈钢执行机构安装系统,允许您选择纽波特的手动或电动执行机构附加在舞台上的左或右配置。non-influencing锁(也是可逆的左手配置)类似我们的线ULTRAlign™系列提供了积极稳定的定位和防范无意调整。该孔径平台版本具有方便的公制M6螺纹孔阵列和25.4毫米行程范围。直径50.8 mm的孔径在16mm的行程中不会被遮挡。这些阶段很容易为XY应用程序堆叠,并且可以与我们的360-90型角支架组合,用于XYZ配置。