The M-401 High-Performance Large Platform Metric Two-Axis Linear Stage integrates two orthogonal positioners into a single low profile unit. This stage offers high load capacity in a design based on three parallel plates. Bearing blocks in the top and bottom plates hold pre-loaded linear ball bushings. The inner plate supports pairs of hardened and polished steel rods that ride in the bushings. Backlash is eliminated by spring loading the moving assemblies against the tip of the actuator. The stages may be mounted in any orientation. This stages has a solid platform and features a convenient array of M6 tapped holes. Actuators are not included. We recommend our SM-13, DM-13, HR-13, or DM-13L micrometers, our AJS-100-0.5 adjustment screw, and our LTA-HS motorized actuator.
位移台类型
Standard Platform
位移轴
X, Y
最大位移台行程
13 mm
螺纹类型
M6
推荐的促动器
SM-13 mic, AJS100-0.5 screw
负载
450 N
角度偏差
<200 µrad
材料
Aluminum
轴承
Ball Bearings
驱动位置
Center drive
最大中心负载
445 N
垂直载重能力
67 N
平台尺寸
139.7 x 139.7 mm
高度
43.7 mm
M-401高性能大型平台米制双轴线性级集成了两个正交的定位器到一个单一的低轮廓单元。这一阶段提供了高负荷能力的设计基于三个平行板。在顶部和底部板轴承块举行预先加载的线性球衬套。内板支撑着成对的硬化和抛光的钢棒,它们安装在衬套上。通过对执行机构顶部的移动组件进行弹簧加载,消除了间隙。舞台可以安装在任何方向。这个阶段有一个坚实的平台和功能方便的阵列M6抽头孔。执行机构不包括在内。我们推荐我们的SM-13、DM-13、HR-13或DM-13L千分尺、我们的aj -100-0.5调整螺丝和我们的LTA-HS电动执行机构。