The M-460A-X-MIC is a special bundle of three M-460A-X Linear Stages included with all required SM-13 Micrometers. The M-460A-X features all aluminum construction with hardened ball bearings running along opposing pairs of polished and hardened stainless steel rods. This offers exceptional straightness of travel, but a lower load capacity than our crossed-roller bearing stages. The SM-13 Vernier Micrometer is a standard drive for most Newport stages, including the 460A-Series stages. It has a 13 mm travel range and a 9 lb. load capacity. The SM-13 has a 0.5 mm pitch (50.8 TPI) threads and read directly in increments of 10 μm, with vernier reading of 1 μm.

• 位移轴

  X

• 最大位移台行程

  13 mm  

• 螺纹类型

  M6

• 推荐的促动器

  Included

• 负载

  67 N  

• 角度偏差

  <150 µrad

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 驱动位置

  Center drive

• 最大中心负载

  67 N  

• 垂直载重能力

  22 N  

• M-460A-X- mic是由三个M-460A-X线性级组成的特殊束，包含所有所需的SM-13微米。M-460A-X采用全铝结构，硬化滚珠轴承运行在对对抛光和硬化不锈钢棒。这提供了独特的直线度旅行，但一个较低的负荷能力比我们的交叉滚子轴承阶段。SM-13游标千分尺是大多数新港级的标准驱动，包括460 a系列级。它有13毫米的行程范围和9磅的负载能力。球场SM-13有0.5毫米(50.8 TPI)线程和直接在10μm增量,读取1μm游标读数。