The M-460A-XYZ-MIC is a special bundle of three M-460A-XYZ Linear Stages included with all required SM-13 Micrometers. The Z Axis Stage/Bracket is user removable allowing conversion of an XYZ Model to an XY Model. The M-460A-XYZ features all aluminum construction with hardened ball bearings running along opposing pairs of polished and hardened stainless steel rods. This offers exceptional straightness of travel, but a lower load capacity than our crossed-roller bearing stages. The stages are spring loaded against the drive actuator for backlash free motion. Vertical-drive assemblies carry the load through the actuator spindle rather than the springs for positive load support. Metric M6 tapped mounting holes are provided.
位移轴
X, Y, Z
最大位移台行程
13 mm
螺纹类型
M6
推荐的促动器
Included
负载
67 N
角度偏差
<150 µrad
材料
Aluminum
轴承
Ball Bearings
驱动位置
Center drive
最大中心负载
67 N
垂直载重能力
22 N
M-460A-XYZ mic是一个由三个M-460A-XYZ线性级组成的特殊束,包括所有必需的SM-13微米。Z轴阶段/支架是用户可移动的,允许将XYZ模型转换为XY模型。M-460A-XYZ采用全铝结构,淬火滚珠轴承沿抛光和淬火不锈钢棒对对运行。这提供了独特的直线度旅行,但一个较低的负荷能力比我们的交叉滚子轴承阶段。这些级是弹簧加载到驱动执行机构上,用于间隙自由运动。垂直驱动组件通过执行机构主轴而不是弹簧承载负载。提供公制M6螺纹安装孔。