The M-460A-X 12.7 mm Travel Quick-Mount Linear Stages has an integrated, yet modular, design allowing for increased versatility. The M-460A-X features all aluminum construction with hardened ball bearings running along opposing pairs of polished and hardened stainless steel rods. This offers exceptional straightness of travel, but a lower load capacity than our crossed-roller bearing stages. The stages are spring loaded against the drive actuator for backlash free motion. Vertical-drive assemblies carry the load through the actuator spindle rather than the springs for positive load support. Metric M6 tapped mounting holes are provided. One actuator is required and is ordered separately.

• 位移轴

  X

• 最大位移台行程

  13 mm  

• 螺纹类型

  M6

• 推荐的促动器

  SM-13 mic, AJS100-0.5 screw

• 负载

  67 N  

• 角度偏差

  <150 µrad

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 驱动位置

  Center drive

• 最大中心负载

  67 N  

• 垂直载重能力

  22 N  

• 
  

M-460A-X 12.7 mm行程快速安装线性级具有集成，但模块化的设计，允许增加通用性。M-460A-X采用全铝结构，硬化滚珠轴承运行在对对抛光和硬化不锈钢棒。这提供了独特的直线度旅行，但一个较低的负荷能力比我们的交叉滚子轴承阶段。这些级是弹簧加载到驱动执行机构上，用于间隙自由运动。垂直驱动组件通过执行机构主轴而不是弹簧承载负载。提供公制M6螺纹安装孔。需要一个执行机构，并单独订购。