High-performance, low-profile, precision, ball bearing linear stage with 100 mm travel range. Model M-443-4 features exceptional performance, usability, and value with a 258 N centered load capacity and M6 mounting holes. Hardened balls rolling between opposing pairs of hardened and polished stainless steel rods allow for stability, repeatability, and exceptionally smooth motion. Actuators bear upon a hardened carbide insert. Springs provide preload against the actuator tip to eliminate backlash.

A stable stainless steel actuator mounting system allows your choice of manual or motorized actuators to be attached in either a left- or right-hand configuration. Note that this stage does not have a lock and does not include the required two actuators. The following actuators are recommended and may be ordered separately: AJS100-2, SM50, and LTA-HS.

• 位移轴

  X

• 最大位移台行程

  102 mm  

• 螺纹类型

  M6

• 推荐的促动器

  SM-50 mic, AJS100-2 screw

• 负载

  258 N  

• 材料

  Aluminum

• 轴承

  Ball Bearings

• 驱动位置

  Side drive

• 
  

高性能、低姿态、高精度、滚珠轴承直线级，行程范围100mm。型号M-443-4具有出色的性能、可用性和价值，以258n为中心的负载能力和M6安装孔。在相对对的硬化和抛光不锈钢棒之间滚动硬化球允许稳定性，重复性，和异常平滑的运动。执行机构安装在硬质合金刀片上。弹簧对执行机构尖端提供预紧力，以消除间隙。

一个稳定的不锈钢执行机构安装系统允许您选择手动或电动执行机构，以附在左边或右边配置。请注意，这个阶段没有锁，也不包括所需的两个驱动器。以下执行机构是推荐的，可以单独订购:AJS100-2、SM50和LTA-HS。