feedback locked Single Longitudinal Mode CW operation
mode hops and lock loss free
very low noise performance, < 0.1% rms
excellent beam quality from smallest footprint
lowest power consumption for given output
| Output Power (CW) | mW |
low power version: 5‐ 200 high power version:500-3000 |
| Wavelength | nm | 1064 |
| Output Beam Diameter, TEM00 | mm |
low power version: 0.8 high power version: 1 |
| Beam Divergence | mrad | < 1, diffraction limited |
| Beam Pointing Stability | μrad/°C | ≤ 5 |
| Longitudinal Mode Structure | SLM | |
| Line Width | MHz | < 0.5 |
| Line Spectral Position Stability | MHz (pm) | +/‐ 50 (+/‐0.2) within 4 hrs of CW operation |
| Coherence Length | m | > 100 |
| Mode Hops Free Fine Tuning Range | GHz | 25 –30 (optional) |
| Polarisation | Linear, Vertical; ≥100:1 | |
| Output Power Noise | % | ≤ 0.1rms, ≤ 1p‐p (10Hz –10MHz) |
| Output Power Stability | % | ≤2, within any 4 hours ofCW operation |
| Working Temperatures | °C | 15 –35, conductive cooling viamounting interface |
| Storage Temperatures | °C | ‐20 to 75 |
| Humidity | % | 5 ‐95, non‐condensing |
| Warm up time | min | <10 |
| Dimensions and Electrical: | ||
| Operating Voltage | VAC | 90 to 240 |
| Frequency | Hz | 50‐60 |
| Power Consumption | W | <20 |
| Dimension | mm |
Low power version: Laser Head 50x50x120; Controller 170x53.5x163 High power version: Laser Head 80x75x198; Controller 170x53.5x223 |
Fixed output power turnkey system, CW operation, factory aligned and sealed.
Specification may be subject to change without notice.